Compare Products

10-spoke wheels

• The ten-spoke lightweight aluminium alloy wheels guarantee agility and perfect control of the set-up at all speeds. The 3.5x17 front wheel and 6x17 rear are fitted with Pirelli Diablo Rosso II 120/70 ZR and 180/60 ZR tyres respectively.

180/60 rear tyre

• At the rear the Monster 821 uses a 180/60ZR17 tyre with the same width/height ratio as is used in national and world Supersport competitions, which offers a larger contact area than the "classic" 180/55; the higher and slightly wider contour improves handling and rider comfort, while the larger contact area increases traction in acceleration and improves stability on the straight.

9 MP ABS (Anti-Lock Braking System)

• The ABS system provided is a 9MP multi-calibration one that lets the rider switch from one configuration to another by selecting the desired Riding Mode. The 9MP ABS prevents the front and rear wheels from locking and has further improved rear lift-up prevention, providing a very short stopping distance and high stability by using the information received from the pressure sensor located on the front wheel callipers. The ABS can also be disabled by the rider. The ABS-Off option can be selected from the Riding Modes configurations and stays on even after turning the ignition off.

Adjustable seat

• The new Monster 821 is fitted with an adjustable seat (± 25 mm) that can adapt to the needs of customers all over the world. The standard seat height can easily be adjusted to the lowest (785 mm) or highest (810 mm) positions. In addition, two optional seats allow riders to lower it another 20 mm (765/790 mm) or even 40 mm (745/770 mm).

Brembo braking system

• The front brakes of the Monster 821 have high-performance, pump-activated Brembo monobloc M4-32 radial callipers, equipped with high-calibration multiple 9MP ABS as standard. The four-piston front callipers, fitted radially, act on 320 mm discs, while the Brembo two-piston rear calliper is fitted on a 240 mm disc.

Customised ergonomics

• The dimensions of the new Monster 821 have been completely redefined and its ergonomics redesigned to offer maximum versatility in all situations and driving conditions. The new dimensions of the Monster provide ample space even for a rider 1.85 m tall and a passenger 1.75 m tall, also enabling you to transport luggage without any problems. The seat position is very comfortable, ideal even for long distances, and the driving position is upright thanks to the best possible positioning of the handlebars. The whole thing is completed by a passenger seat with an easily removable cover, and lowered footpegs and handles which make the ride comfortable and enjoyable for the passenger.

Ducati Safety Pack (DSP)

• The designers of the new Monster didn't focus solely on achieving excellent performance, but also on guaranteeing a high level of safety for the rider and passenger in all driving conditions. This second goal has been achieved by providing the Monster 821 with the Ducati Safety Pack (DSP) as standard, along with the 9MP ABS system and the 8-profile Ducati Traction Control (DTC).

Ducati Traction Control(DTC)

• Ducati's DTC gives the rider a choice of eight profiles or "sensitivity levels", each programmed with a different wheelspin tolerance value, matched to progressive levels of riding skill, and graded from one to eight. A preset level at which DTC intervenes is assigned to each Riding Mode. When DTC is on, the control unit analyses the data sent from the front and rear wheel speed sensors, detects the amount of wheelspin, and works out what type of intervention is necessary. This intervention is carried out very smoothly by electronically slowing down the engine injection to reduce torque, until rear grip is completely restored. DTC can also be disabled by the rider. The DTC profiles are factory pre-set for each of the three Riding Modes, but can be customised individually and saved in order to best meet the needs of the rider. The initial settings can easily be reset via the "default" option

Exhaust system

• The Testastretta 11° 821 engine is combined with a type 2-1-2 exhaust system, which leaves no room for doubt about the performance that the new Monster 821 is capable of unleashing. The engine control unit has a lambda probe for each individual cylinder, guaranteeing delivery of the right amount of fuel, while the stylish vertically stacked cannon silencers are equipped with catalytic converters that ensure compliance with Euro 3 standards. An electronically controlled mid-section adjustment valve optimises exhaust pressure according to engine speed.

Frame inspired by racing bikes

• The new Monster has a frame structure that's inspired by the racing models, with the engine as the star. The structure is comprised of a compact Ducati trellis frame, mounted directly onto the cylinder heads and the engine itself. Even the shock and the rear sub-frame are connected to the engine. The sub-frame has a classic tubular layout and is further enhanced by the way it is coupled with the exhaust system, the plastic parts and the tail light. This sophisticated, light and robust structure enables the Monster to achieve the lowest kerb weight in its category(205.5 Kg).

Front headlight

• The front of the new Monster 821 is dominated by a rounded headlight and flanked by forks, a distinctive feature of the imposing, unmistakable shape of the Monster The headlight is made up of a modern unit that uses a bulb for high and low beam and LED technology for the two parking lights located on the sides The encased tail light is fully LED.

Instrumentation

• The Monster 821's compact instrument panel has lights on the upper part of the dashboard for warnings relating to neutral, indicators, full beams, engine rpm limit, oil pressure and fuel reserve, while the lower part is comprised of an LCD display with a DOT-Matrix area to display all the other data. The display gives information about speed, rpm. totaliser, trip1 and trip2, engine cooling liquid temperature, ambient temperature and clock. In addition, it displays present fuel consumption, average fuel consumption, average speed and duration of trip. The DOT-Matrix area permanently displays the Riding Mode selected and the corresponding ABS and DTC levels set, and the 3 Riding Modes available can be selected very easily both when stationary and when in motion by using the indicator return button.

Passenger handles

• Particular care has been taken with passenger comfort, with a wide padded seat, footpegs that ensure an optimum riding position, and standard ergonomically shaped handles built into the bike's design.

Power and torque

• Thanks to the specially designed air filter and exhaust system, the Testastretta 11° engine generates power comparable to that of a 3/4 cylinder engine. Even the most demanding "Monsteristi" and sports riders will be able to appreciate the punchy torque that is readily available at a wide range of speeds, already reaching more than 85% of its maximum torque at 5500 rpm. The Testastretta 11°'s character is enhanced by the choice of the final ratio set to develop maximum acceleration in each gear and maximum engine response with each turn of the throttle.

Ride-by-Wire

• The Ride-by-Wire (RbW) system is an electronic interface between the engine and the Monster's twistgrip, which enables the ideal power to be delivered to be set depending on the Riding Mode selected. The twistgrip doesn't have a throttle cable directly linked to the throttle bodies, but sends a signal to the control unit which, in turn, electronically controls the opening of the throttle bodies The RbW system uses three different mappings to regulate power delivery: 112 hp for a sports delivery 112 hp for a progressive delivery suitable for touring 75 hp for a progressive delivery suitable for city use

Riding Modes

• The new Monster incorporates the most innovative, state-of-the-art Ducati technology, including the renowned Ducati Riding Modes. The three Riding Modes (URBAN, TOURING, SPORT) combine the leading technologies in the product class, such as Ride-by-Wire (RbW), Ducati Traction Control (DTC), and 9MP ABS with multiple settings. The rider can change the character of the bike by simply clicking a button, even mid-ride, choosing the configuration that best suits his riding style or the road conditions from the three different pre-set options (Riding Modes). The Riding Modes allow the rider to instantly change the power delivered by the engine and the DTC and ABS activation levels. The Riding Modes are factory pre-set for each of the three parameters, but can be customised individually and saved in order to best meet the needs of the rider. The initial settings can easily be reset via the "default" option

Service intervals

• The meticulous design and top-quality materials used for the Monster have allowed amazing results to be achieved. Adjusting the valve clearance is scheduled for every 30,000 km and changing the oil every 15,000 km, increasing service intervals and cutting running costs. These results were made possible by improving combustion efficiency and cutting the operating temperatures of the Testastretta 11° engine.

Slipper clutch

• The transmission features an oil bath clutch with "slipper" function and a lever that is very light to the touch. It is equipped with a gradual self-servo system that compresses the discs when the engine speed is reduced, allowing the load on the pressure plate springs to be reduced. This reduces the stress on the clutch lever, ensuring optimum conditions in city traffic when frequent gear changes are required, or on long trips. When the transmission force is reversed (overload), the same mechanism makes it possible to reduce the pressure on the clutch plates, enabling them to work in "slipper" mode, which reduces the destabilising effect on the rear end during aggressive downshifting and gives a feeling of greater fluidity when decelerating or downshifting in normal driving conditions.

Suspension

• The geometry of the frame, inspired by racing bikes, is completed by inverted forks (Ø 43 mm), while the rear suspension is entrusted to a Sachs monoshock with adjustable compression and extension, mounted on one side vertically on the cylinder head and, on the other, on a sturdy Ducati double-sided swingarm. This exceptional suspension allows contact with the wheel to be maintained and guarantees control and agility even in extreme driving conditions.

Testastretta 11°

• The Monster 821 is powered by the Testastretta 11° 821 cc engine, with air injection system. A secondary air system similar to the one used on the 1199 Panigale has been introduced in order to optimise operation and reduce combustion cycle variability, without affecting emissions. A controlled flow of clean air is injected into the exhaust pipe, enabling total oxidation of the hot exhaust gases, efficiently cutting hydrocarbon and carbon monoxide levels. The Testastretta 11° engine fitted to the Monster 821 is an exclusive feature of these bikes and its structure has been engineered to be an integral element of the frame. In addition, the air filter and exhaust system have been designed to provide improved torque at low-medium engine speeds. The Testastretta 11° 821 cc engine generates power equal to 82.4 kW (112CV) @ 9,250 rpm and 89.4 Nm (9.1kgm) of torque at 7,750 rpm.

Unmistakable Fuel Tank

• The Monster's 17.5 L fuel tank is an integral part of the bike's overall design. The distinctive fuel tank, pure "Monster" in style, completes the Monster's strong, unmistakable silhouette, while its metal structure and sculpted knee panels give the bike a feeling of solidity.